Tunnel Drainage

Station Box Floor, Cavidrain Invert, Sydney Metro, Australia

Project Information

Client:New South Wales Government
Contractor:Northwest Rapid Transit
Consultant:Mott MacDonald
Product:Cavidrain Invert
Quantity30,000m2
Benefits:- Reduced installation requirements
- Increased drainage capacity
- Minimised damage caused by mineral calcification
- Proven and reliable drainage system

Project Description

Sydney Metro is Australia’s largest public transport project. Once complete, the Metro will deliver 31 metro stations and more than 66 km of new metro rail, revolutionising the way Australia’s biggest city travels. Sydney Metro Northwest is the first stage of the Metro and will be the first fully-automated metro rail system in Australia.

The Challenge

The Northwest project involved building 15 km twin tunnels and the construction of eight new railway stations and 4,000 commuter car parking spaces. Five new underground stations were constructed at Bella Vista, Norwest, Showground, Castle Hill and Cherrybrook. 

Consulting engineer Mott MacDonald was engaged by the contractor to undertake detailed design of each underground station. Mott MacDonald recognised that creating a long-term dry station required not just a good waterproofing system but also hydrostatic pressure relief behind the waterproofing. In addition, the engineer needed a system that would combat the oxides in the ground water known to clog traditional pipe systems.

The Solution

Identifying the successful use of Cavidrain Invert in the Legacy Way Tunnel in Brisbane, Mott MacDonald approached ABG to assist in the detailed design of the underground stations.

Cavidrain Invert was chosen by the engineer to form a drainage network under the floor of each station. This system enabled enzymes that dissolve the oxide precipitates to be added periodically.

Cavidrain, with its multiple inter-connected flow channels, is particularly resistant to precipitate formation and allows ground water to flow safely under the station box from tunnel to tunnel.

Cavidrain Invert was laid on to the blinded rock formation and the concrete slab cast in to Cavidrain. Once set, Cavidrain therefore becomes as strong as the concrete itself.

Cavidrain Invert drainage geocomposites showing water flow areas for tunnel drainage

The ABG Service

ABG provided design support including drainage and bearing area calculations, produced shop drawings, and detailed installation advice. ABG customised the manufacture of Cavidrain Invert to suit project requirements, and delivered on time to allow the project to meet tight timescales.

Contact ABG today to discuss your tunnel project and drainage specific requirements and discover how ABG past experience and innovative products can help on your project.

Installed panels of Cavidrain ready to receive concreteInstalled panels of Cavidrain ready to receive concrete
 Installed panels of Cavidrain geocomposite ready to receive concrete Installed panels of Cavidrain ready to receive concrete
Extract from shop drawing illustrating Cavidrain wall channel detailingExtract from shop drawing illustrating Cavidrain wall channel detailing
Illustration of the completed stationIllustration of the completed station


Cavidrain Invert

Cavidrain® Invert provides a pre-formed drainage layer into which the concrete floor slab can be easily cast. Cavidrain® Invert replaces the crushed stone and pipes traditionally used to collect and transport away infiltration water.

more...

Cavidrain Invert geocomposite for tunnel invert drainage
 

Products

Cavidrain Invert

Cavidrain® Invert provides a pre-formed drainage layer into which the concrete floor slab can be easily cast. Cavidrain® Invert replaces the crushed stone and pipes traditionally used to collect and transport away infiltration water.

more...

Cavidrain Invert geocomposite for tunnel invert drainage
 

Downloads

 

Login for Access